CT30 XP Mobile Computer User Guide 15
Good Read LED Descriptions
About the Audio Features
The CT30 XP has one speaker, three microphones, and several software settings to
configure sound volume or enable vibration feedback.
Adjust Speaker Volume
Use the Volume button on the left side of the computer to adjust the volume of
ringtones, media, notifications, and alarms.
Note: The volume setting varies by OS version.
To quickly change the active speaker volume level:
• Press the top of the Volume button (+) to raise the volume of the active
speaker.
• Press the bottom of the Volume button (-) to lower the volume of the active
speaker.
To access the volume quick set menu:
1. Press the Volume button.
2. Adjust the volume level using the on-screen menu.
• Tap the icon at the top to toggle the media volume between Sound On ,
Vibrate Only , or Silent .
• Use the slider to adjust the media volume.
• Tap to toggle media volume off.
• Select at the bottom to adjust Media, Call, Ring, or Alarm volume levels.
LED Color Description
Green Good read of a barcode.
Blinking green The data collection imager is processing or starting up.
Red Failure to scan barcode.
Check to make sure you have the correct symbology enabled.
To Next Page
Loading...
Need help?
General