Honeywell CT30 XP Series - OCR Settings Options

46 CT30 XP Mobile Computer Series User Guide
OCR Settings Options
The following options are available on the OCR Settings tab.
OCR Settings Tab
Result Regex Tab
Custom regex
Add custom
regex
Setting Description Default
Enable OCR
Wedge
Turn the OCR wedge on or off. Disabled
Sound Mode Choose when a notification sound will be played for an OCR scan. Sound
after
decode
OCR Exclusive When this setting is enabled, the scanner will only decode the OCR
text and not decode the normal barcode.
Disabled
Result String
Mode
Sets whether the device will capture the image in a block or line.
• Block - The device will capture the whole picture from the
scanner and process all of the data in it.
• Line - The device will only take one line of text as a character
string to process the result.
Line
Single Result Determines if the device will wedge one result or multiple results.
• Enabled - Only one result will wedge.
• Disabled and Result String Mode is “Line” - A pop-up will be
displayed with all results captured from scanning. The user
must select the results to use. If the user does not select any
results, the scan operation will dismiss after 20 seconds.
Enabled