18 CT30 XP Mobile Computer User Guide
transfer files between the two computers. If you are transferring files to and from a
Mac, use the Android File Transfer application (available from www.android.com/
filetransfer).
Note: File transfer through a USB connection is disabled by default. You need to configure
the USB connection for transferring files or photos.
You can use these accessories to connect your mobile computer to your
workstation:
• Home Base or Ethernet Home Base and a standard USB Type B to A cable.
• A standard USB communication cable with Type C connector.
Configure USB Connection and Transfer Files
Note: The CT30 XP supports Hi-Speed USB communications (USB 3.0) with theoretical
maximum data transfer rate of 5Gbps. USB on-the-go (OTG) supported.
1. Connect the mobile computer to your workstation.
2. On the mobile computer, swipe down from the top of the screen to see the
notifications.
3. Tap the Android System notification twice to open the options menu.
You may need to scroll down to the bottom of your notifications to find it.
4. Select either File Transfer or PTP (picture transfer protocol).
5. Open the file browser on your workstation.
6. Browse to the mobile computer. You can now copy, delete, or move files
between the CT30 XP and your workstation.
Accessories for the Computer
The CT30 XP ships with a battery. All other accessories are ordered and shipped
separately.
For a complete list of compatible accessories for your mobile computer and their
part numbers, see the CT30 XP Accessory Guide available for download at
sps.honeywell.com.
Contact your local sales representative for ordering information or for assistance in
choosing the correct power supply for your device.
Accessory Part Number Use With
x = Kit variations. See Product Accessory Guide at sps.honeywell.com for additional details.
Protective Boot CT30-PB-XP CT30 XP
To Next Page
Loading...
