12 CT30 XP Mobile Computer User Guide
• Set up the Wi-Fi network connections.
• Set the time, date, and time zone.
• Personalize (name) the computer.
• Set up security and privacy options.
Once you complete the initial setup, the Welcome screen no longer appears when
you power on the computer and Provisioning mode is automatically turned Off
(disabled). Scanning a barcode to install applications, certificates, configuration
files, and licenses on the computer is restricted when Provisioning mode is turned
Off. To learn more About Provisioning Mode see page 89.
Unlock the Screen
The screen lock automatically activates every time the computer is turned On or
when the computer wakes from Screen Timeout mode (sleep mode).
• Swipe up from the bottom of screen to open.
The level of security provided depends on the type of lock set (e.g., Swipe, Pattern,
PIN, Password, or Face Unlock). The default setting (Swipe) provides no protection
against unauthorized access to your computer.
Unlock with Face Unlock
Use facial recognition with the front camera to unlock the computer in sleep mode.
1. Press the Power button to wake the computer.
2. While the bottom of the lock screen displays a smiling face, hold the front
camera in front of your face until the computer unlocks.
If the computer does not recognize your face, a frowning face will display. To
retry face unlock, tap the frowning face to display a smiling face.
Note: When face unlock is enabled, you must use a PIN, pattern, or password to unlock the
computer after it turns On or restarts.
Change the Screen Lock to Protect the Computer
After you start using the computer, you should change the screen lock to prevent
unauthorized persons from accessing the computer after the screen lock activates,
unless they input the correct password, PIN, or pattern.
To Next Page
Loading...
