EasyManuals Logo

Honeywell CT45 Series User Manual

Honeywell CT45 Series
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
CT45/CT45 XP Mobile Computer Series User Guide 49
Assigning a SIM to SIM Slot 1
To assign a SIM to SIM Slot 1:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap SIM Selection .
3. Under Select New Configs, tap the arrow next to SIM Slot 1.
4. Select the SIM from the drop-down list.
5. Click APPLY.
6. A prompt verifies that you want to apply the new configuration. Tap OK.
7. The system indicates that the settings have been saved. Tap OK.
Using Dual SIM Dual Standby Mode
The CT45/CT45 XP allows you to enable a Dual SIM Dual Standby (DSDS) setup
where both SIMs are provisioned with separate mobile plans. In DSDS, both SIMs
are active but only one SIM can handle data at a time.
When DSDS mode is turned ON, both SIM Slots are shown. In this mode, SIM Slot 1
and SIM Slot 2 cannot be modified.
SIM Slots cannot be
modified in Dual SIM
Dual Standby mode.
Select the mobile carrier
Turn Dual SIM Dual
Standby off

Table of Contents

Other manuals for Honeywell CT45 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell CT45 Series and is the answer not in the manual?

Honeywell CT45 Series Specifications

General IconGeneral
BrandHoneywell
ModelCT45 Series
CategoryPDA
LanguageEnglish

Related product manuals