Honeywell CT45 Series User Manual

84 CT45/CT45 XP Mobile Computer Series User Guide
Enable or Disable Provisioning Mode
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Provisioning mode.
3. Tap the button to toggle the provisioning On or Off.
About Wi-Fi Staging
You can use the Honeywell Wi-Fi Staging app to quickly set up new devices by
configuring one device and using it to stage others. Wi-Fi Staging can also be used
to enroll devices in a Mobile Device Management (MDM) system by connecting
units to a defined network and downloading and installing the MDM client app.
Once you have set up a configuration in the Wi-Fi Staging app on the server device,
Wi-Fi staging uses that device as a hotspot and waits for a client to connection. The
configuration is distributed to the client device once communication is established
between the client and the server device.
Staging Devices
Wi-Fi Staging requires two steps:
1. Set up a master device to act as a server (see Set Up a Device as a Server on
page 84).
2. Set up the client device (see Set Up Client Devices on page 87).
Set Up a Device as a Server
Wi-Fi Staging provides two kinds of configurations for a master device acting as a
server through a hotspot. Setup of the server device differs based on the staging
configuration chosen:
• Basic Configs include the most common system settings:
• System language
• Bluetooth and NFC
• System volume
•Location
•Network
•File download
• Application installation or launch

Honeywell CT45 Series Specifications

General

Brand	Honeywell
Model	CT45 Series
Category	PDA
Language	English