Chapter 4. WIRING
4-4
4-3 Terminal Connections
Use crimped terminals that fit onto M3.5 screws.
7.4
7.3 max.
6.6 max.
3.7dia.
Unit: mm
• When installing the DCP301 in locations subject to vibration or impact, be sure
to use round crimped terminals to prevent the lead from coming loose from the
terminal.
• When wiring with crimped terminals, take care to prevent contact with adjacent
terminals.
• The recommended tightening torque for the terminal screws is 0.78 to
0.98N•m.
Handling Precautions
To Next Page
Loading...
