Oxygen measuring device MySign
®
O
16 Doc no.: 065-07-1001825_MySignO_GB-0.pdf / 12.11
Switching off the unit
The will show a countdown for the shutdown process, starting with the number 3. If the
ON/OFF button is released at any time during the countdown, the countdown is stopped and
the unit stays on.
Î Hold the button pressed for about 3 seconds
Example: Information displayed while the unit is being switched off:
Once the unit has been switched off, the data from the measurements that have
been performed are stored inside the unit's memory and can be viewed again at
a later time.
To Next Page
Loading...
Need help?
General
