Honeywell Envitec MySignO User Manual

Oxygen measuring device MySign
®
O
20 Doc no.: 065-07-1001825_MySignO_GB-0.pdf / 12.11
4.6.2 Measured value
In this mode, the system will show the current oxygen concentration. To view an overview of
the measurements that have already been performed, go to “Measurement series” in the “Data
memory” menu.
Select “Measured value” from the “View” menu.
Horizontal position Î Measured value view
When holding the unit horizontally, the measured value will also be displayed
horizontally.

Honeywell Envitec MySignO Specifications

General

Brand	Honeywell
Model	Envitec MySignO
Category	Measuring Instruments
Language	English