Oxygen measuring device MySign
®
O
Doc no.: 065-07-1001825_MySignO_GB-0.pdf / 12.11 5
1.1 Storage and packaging
The MySign
®
O and O
2
sensors must be stored in their original packaging at temperatures
between -20 °C … 50 °C.
1.2 Oxygen sensor
x Do not cause any mechanical damage to the sensor!
Never use products that are damaged or use products for purposes other than their
intended purpose.
x Do not disinfect using liquids.
x Clean using a soft and damp disposable cloth.
Hazards to people and the environment
x Lead/lead compounds: Toxic if ingested, when inhaled as dust or absorbed
through the skin. Æ Protective measures specified under TRGS 505 (6/88)
x Potassium hydrate solution: Corrosive on contact with skin and eyes.
Disposal
Dispose of properly via incineration in a special waste incinerator. Do not dispose of the
substance as domestic waste.
Observe the relevant local and government rules and regulations!
1.3 Battery
x Do not throw into fires!
x Do not damage or change the battery's structure in any way.
x Do not allow to come into contact with fluids.
x Do not store with other metallic objects as this could cause the battery to short-circuit.
Disposal
Do not dispose of batteries as household waste!
To Next Page
Loading...
