Honeywell ESSER FACP - Page 16

Periphery components for ESSER FACP
16 TI 798960.GB0 / 04.20
Detector Specifications (not ATEX)
Rate-of-rise heat detector 803271.EX
*1
/ 803271.EX.F0
*1
/ 803271.EX.NU
*1
Quiescent current @ 19 V DC
:
40 µA
Ambient temperature
:
-20 °C … +50 °C
*5
Specification
:
EN 54-5 A1R : 2000 / A1 : 2002
VdS approval
:
G 209223
Declaration of performance
:
DoP-20913130701
Optical smoke detector 803371.EX
*2
/ 803371.EX.F0
*2
/ 803371.EX.NU
*2
/ 803371.EX.IN
*2
Quiescent current @ 19 V DC
:
50 µA
Ambient temperature
:
-20 °C … +70 °C
*5
Specification
:
EN 54-7 : 2006
VdS approval
:
G 209224
Declaration of performance
:
DoP-20914130701
O
2
T-multisensor detector 803374.EX
*2
/ 803374.EX.F0
*2
/ 803374.EX.NU
*2
/ 803374.EX.IN
*2
Quiescent current @ 19 V DC
:
60 µA
Ambient temperature
:
-20 °C … +65 °C
*5
Specification
:
EN 54-7 : 2006 / -5 B : 2000 / A1 : 2002
*6
, CEA 4021
VdS approval
:
G 209225
Declaration of performance
:
DoP-20915130701
• All values based on a temperature range of 25 °C.
• The FACP emergency power capacity is determined using the programming software tools 8000
or via the calculation function available at www.esser-systems.com.
• For further information, safety calculations and certifications, see Technical Information
798920.EU.xx.
EC-Type Examination acc. Construction Products Regulation (CPR)
*5
Ambient temperature of fire detector types for detailed system design
*6
Except "80337x.EX.F0" and "80337x.EX.NU"