Galaxy 3 Series Programming Manual
26
Option 32 – Outputs
Outputs are tested by function: for example, when 01 = BELLS is selected, then all outputs programmed as
Bells are activated. Refer to option 53 = PROGRAM OUTPUT for a full description of each output func-
tion.
On selecting the Outputs option, output function type 01 = BELLS is offered for selection. Press the A or B
keys to move to the required output function type. Alternatively, the function type number can be entered
directly, for example entering 13 selects SECURITY. To test the selected output function press the ent key.
The ent key can be used to toggle the function ON and OFF as required. To escape from the Outputs
option, press the esc key.
Users
User types 2.5 & 3.6 only have access to 01 = BELLS and 02 = STROBE of the Output option. Only the
engineer has access to all the output types.
32 - Outputs
To Next Page
Loading...
Need help?
General
