Galaxy 3 Series Programming Manual
28
42 - Codes
Figure 3. Programming Codes
Option 42 – Codes (Quick Menu Option 8)
The Codes option is used to assign, modify and delete the codes that allow users to operate and access the
system. The Codes option is divided into two sub-menus:
1. User Codes - sub-divided into up to 10 menus (depending on panel used and whether the group and
MAX mode options are enabled in Menu 63) that determine all of the access information for users who are
requiring PINs. This option also assigns MAX details to user numbers;
2. PIN Warning - determines the warning period given to users prior to the programmed PIN Change
date (refer to option 51.42 = PARAMETER.PIN Change);
Programming Codes
1 = User Codes
1 = Modify Pin
4, 5 or 6 digit pin
2 = Modify Type
3 = Modify Name
4 = Time Zone
1.0 to 2.5
6 alpha-numeric characters
0 = Off
1 = Timer A
2 = Timer B
3 = Timer A+B
5 = Temp Code 00-99 days
6 = Modify Groups
G3-48: 1-4
G3-144: 1-8
G3-520: 1-32
7 = MAX Number
10 digit number on MAX card or fob
8 = MAX Function number of required menu option
9 = MAX Keypad
address of keypad that MAX function displays on
10 = Forgive
Antipassback
This function clears passback restrictions
2 = PIN Warning 1 - 28 days
To Next Page
Loading...
Need help?
General
