Galaxy 3 Series Programming Manual
38
42 - Codes (cont’d)
If a user’s card number is assigned a *, then the card becomes Dual access. This means that it will not open
the door on its own; it needs another PIN or card as well. If the PIN belonging to the same user has a #
assigned, then that PIN must be entered first before access will be granted to that card.
If the PIN has no # assigned, then the card will work only in conjunction with any other Dual Access card that
shares one or more groups (see option 42 = Codes for programming).
10 = Forgive Antipassback
This function if selected clears all antipassback restrictions for the selected user.
2 = PIN Warning
This option determines the number of days notification before the PIN Change expiry date (refer to option
51.42 = PARAMETERS.PIN Change) that the user is prompted to assign new code on entry of the expir-
ing PIN. The default period is 28 days, with a programmable range of 1 – 28. If the user does not assign a
new code by the end of the PIN Warning period, then the code is erased on the next unsetting of the system.
NOTE: The PIN Warning ends on the last day of the month, the PIN expires on the first day of the follow-
ing month.
To Next Page
Loading...
