Parameters [51] Galaxy Flex Installer Manual
104
Hide Com Flts [51.90]
Enable this option to prevent line fail, heartbeat fails and communication faults from being
sent and from being indicated on the displayed. There are two options:
0=Disabled, 1=Enabled.
Log IPCheck [51.91]
Use this option to define if the low-level polling on the Ethernet and GPRS module should
be logged in the diagnostic log when a message fails to be acknowledged.
0=Disabled, 1=Enabled.
This function can only be used if the system is set up to require acknowledgements from the
receiver [56.3.3.7.2 or 56.3.2.2.4.2]
To Next Page
Loading...
