Galaxy Flex Installer Manual Appendix E: Declaration of conformity
213
Appendix E: Declaration of
conformity
Compliance and Approvals
This product has been independently certified by VdS to the following directive and
standard.
R&TTE 99/5/EC
EN50131-3: 2009 security grade 2, environmental class II
The Flex control panel is compatible with the relevant parts of the following standards:
EN50131-1:2006+A1:2009 Alarm systems – Intrusion systems – General requirements
(grade 2).
EN50131-5-3:2005 Alarm systems – Intrusion systems: Part 5-3 systems using
wire-free interconnections (grade 2).
EN50131-6:2008 Alarm systems – Intrusion systems – Power supplies (grade 2).
EN50136-1-1: Alarm systems – Alarm transmission systems and equipment –
1998+A2:2008 General requirements for alarm transmission systems.
EN50136-1-3:1998 Alarm systems – Alarm transmission systems and equipment –
Requirements for systems with digital communicators using
the public switched telephone network.
EN50136-2-1:1998 Alarm systems – Alarm transmission systems and equipment –
General requirements for alarm transmission equipment.
EN50136-2-3:1998 Alarm systems – Alarm transmission systems and equipment –
Requirements for equipment used in systems with digital
communicators using the public switched telephone network.
PD6662:2010 Scheme for the application of European Standards for intruder
alarm systems.
BS8243: 2010 Installation and configuration of intruder alarm systems
designed to generate confirmed alarm conditions code of
practice.
To Next Page
Loading...
