Honeywell Galaxy Flex V3 Series - Timer Control [45]

Timer Control [45] Galaxy Flex Installer Manual
72
Timer Control [45]
Timer control menu
45 = Timer Control

 1 = View
 
  1 = Weekly Sched.
 
  2 = Timer Outputs
 
  3 = Autoset

 2 = Holidays
 
  1 = Holiday01 1 = Name, 2 = Modify Dates
 
  2 = Holiday02 1 = Name, 2 = Modify Dates
 
  3 = Holiday03 1 = Name, 2 = Modify Dates
 
  4 = Holiday04 1 = Name, 2 = Modify Dates

 3 = Timers – Status 0 = Off, 1 = On (if Timer Access [51.43] is disabled)
 
  1 = Weekly01 (if Timer Access [51.43] is enabled)
  
   1 = Name
  
   2 = Status 0 = Off, 1 = On
  
   3 = Events
  
   4 = Hol. Period
  
   5 = Hol. Sched
  
   6 = Pattern Day
 
  2 = Weekly02 
   Each one of these menu options
  3 = Weekly03  has the same sub-menus options
   as 1 = Weekly01
  4 = Weekly04 

 4 = Late Work

 5 = Weekend Work

 6 = Acc. Template
View Weekly Schedule [45.1.1]
U
se this option to view the weekly schedules programmed in the Weekly Schedule [65.1]
option.
View Timer Outputs [45.1.2]
Use this option to view the Timer-A and Timer-B outputs with on/off times allocated in the
Timer Outputs [65.2] option.
View Autoset [45.1.3]
Use A and B to scroll through the groups to select one (optional)
and also to view the time
schedule allocated per group.
Use the System Print Timers [57.11] option to print all of the programmed timers; Weekly
Schedule, Timer Outputs, and Autoset.