Honeywell Galaxy Flex V3 Series - Codes [42, Quick Menu 7]

Codes [42, Quick Menu 7] Galaxy Flex Installer Manual
60
Codes [42, Quick Menu 7]
Codes menu
42 = Codes

 1 = User Codes (enter a user code)
 
  01 = Modify PIN (4, 5, 6 digit PIN)
 
  02 = Modify Level (0 to 6)
 
  03 = Modify Name (6 alpha-numeric characters)
 
  04 = Schedule (00 = None)
 
  05 = Modify Groups
 
  06 = Card Number (access control card or fob 10-digit number)
 
  07 = MAX Function (required menu option number)
 
  08 = MAX Keypad (the keypad address that displays the MAX function)
 
  09 = Template
 
  10 = Radio Fob
 
  11 = Camera

 2 = Card Users
 
  1 = Add Batch
 
  2 = Test Batch
 
  3 = Delete Batch
 
  4 = Batch Start
 
  5 = Batch End
 
  6 = Batch DCM Rdr
 
  7 = Template User

 3 = RF Batch Learn

 4 = User Notify

 1 = PSTN
 
  1 = Mobile No.1
 
  2 = Mobile No.2
 
  3 = Mobile No.3

 2 = GSM

 1 = Mobile No.1

 2 = Mobile No.2

 3 = Mobile No.3
Use the Codes option to assign, modify and delete the codes that allow users to operate and
ac
cess the system. The Codes option is divided into two sub-menus:
 User Codes - sub-divided into 11 menus that determine all of the access information for
users who require PINs (depending on the panel used and whether Options [63] and
Access Control [69] are enabled). This option also assigns MAX details to user
numbers.
 Card Users - determines the tags/cards on the system for various users.