Communications [56] Galaxy Flex Installer Manual
148
Module config [56.3]
This section allows alterations to be made to the characteristics of the different
communications modules.
1 = PSTN
1 = Line Fail (0 = Disabled, 1 = Enabled)
2 = No. of rings (04 (1-20))
3 = SMS (1 = Centre ID, 2 = Protocol, 3 = Password)
2 = GSM/GPRS
1 = GSM
1 = Line Fail (0 = Disabled, 1 = Enabled)
2 = GPRS
1 = Encryption
1 = Alarm Report (0 = Disabled, 1 = Enabled)
2 = SIA Control (0 = Disabled, 1 = Enabled)
3 = IP Check (0 = Disabled, 1 = Enabled)
2 = Connection (Timeout, the default is 15 mins)
3 = Line Fail (0 = Disabled, 1 = Enabled)
4 = IP Check Cfg (1 = Intervals, 2 = Acknowledge)
3 = Network 1
1 = PLMN
2 = APN
3 = Login
4 = Password
5 = Centre No.
6 = Connection (1 = Continuous, 2 = Timeout)
4 = Network 2
Same sub-options as Network 1 (without SIM PIN)
5 = Network 3
6 = SIM PIN
7 = SMS Receipt (0 = Disabled, 1 = Enabled)
3 = Ethernet
1 = DHCP (0 = Disabled, 1 = Enabled)
2 = IP Address
3 = Gateway IP
4 = Network Mask
5 = Encrypt
1 = Alarm Report (0 = Disabled, 1 = Enabled)
2 = SIA Control (0 = Disabled, 1 = Enabled)
3 = IP Check (0 = Disabled, 1 = Enabled)
6 = Line Fail (0 = Disabled, 1 = Enabled)
7 = IP Check Cfg (1 = Intervals, 2 = Acknowledge)
To Next Page
Loading...
