Access Control [69] Galaxy Flex Installer Manual
184
69 = Access Control (continued)
3 = DCM
1 = DCM Parameters MAX DCM (select)
1 = Descriptor ABCDE_ (9 characters)
3 = System Group
5 = Reader (01 or 02)
01 = Descriptor (ABCDE_ 9 characters)
02 = Relay Duration - 0-60 seconds (default = 05)
03 = Open Timeout - 1-60 seconds (default = 10)
04 = Group Config
1 = Alarm Group
2 = Group Restrict
3 = Exit Group
05 = Emergencies 0 = Disabled, 1 = Enabled
06 = Security
1 = Nightlock 0-10 weekly schedules
2 = Unlock Time 0-10 weekly schedules
3 = Dual Mode
1 = Disabled
2 = Card and Card
3 = Card and Pin
4 = Dual Time - Option not available
07 = Menu Recall
1 = Menu Function 11-72 (** = not used)
2 = Menu Mode
1 = Triple Repeat
2 = Recall Button
3 = Keypad ** - Keypad
# = Enable
2 = Card Format
0 = Std 26bit
1 = Crp 1K 35bit
2 = 37bit no FC
3 = Northern 34bit
4 = Custom
1 = Format Name
2 = Card Length
1 = 26 Bit, 2 = 27 Bit, 3 = 32 Bit, 4 = 34 Bit
5 = 35 Bit, 6 = 37 Bit,7 = 40 Bit
3 = Card Number
1 = Start point
2 = Field Length
To Next Page
Loading...
Need help?
General
