Appendix B: SIA & contact ID event codes Galaxy Flex Installer Manual
208
Ev SIA Event Log Log Event Ev Type Trigger Contact
Description Event Description ID Event
00 - Non-reported Events
00 SUSP. SET USER NONE 0
00 BEGIN SET USER NONE 0
00 INST SET USER NONE 0
00 ENT UNSET UNSET NONE 0
00 ENT SETTING USER NONE 0
00 ENT DELAY USER NONE 0
00 ENT SET USER NONE 0
00 ENT UNSTG USER NONE 0
00 ABORT SET USER NONE 0
00 AUDIBLE MISC NONE 0
00 JAM DELAY MISC NONE 0
00 FB BATLOW USER NONE 0
00 DIAG REC LIST NONE 0
00 LOC WRITE LIST NONE 0
00 REM WR/RD LIST NONE 0
00 DIAG CHK LIST NONE 0
00 DISCHARGE ZONE 13.ELEC ST 0
00 ETST PASS USER NONE 0
00 ETST FAIL MISC NONE 0
00 OVERRIDE MISC NONE 0
00 R. TIMESET MISC NONE 0
00 CU-RIO.SW MISC NONE 0
00 CLBK1 ERR USER NONE 0
00 REM TRY USER NONE 0
00 REM FIN USER NONE 0
00 REM ABORT USER NONE 0
00 REM FAIL USER NONE 0
00 SILENCE USER NONE 0
00 MONITOR USER NONE 0
Note 1:
Dependent upon zone type selected.
Note 2: Custom SIA events allow existing zone types to be modified in order to send specific SIA events
from the panel. This allows more specific SIA information to be transmitted. The zones used to program the
custom SIA events will continue to function as per the zone description.
To Next Page
Loading...
Need help?
General
