14
3D DNR (Digital Noise Reduction) Setting
Digital Noise Reduction reduces the noise/
distortion on the screen in night mode, allowing
clear images in low-light conditions. Set 3D DNR
to OFF, LOW, MIDDLE, or HIGH. The default
setting is HIGH.
Color Menu
White Balance Setting
Set WHITE BAL to AWB, ATW, PUSH, or MANUAL to set the White Balance mode.
ATW Auto Tracking White Balance mode compensates for color temperature changes between 2400°K
and 11000°K.
AWB Auto White Balance Control mode compensates for color temperature changes between 2000°K
and higher than 15000°K.
PUSH
Push mode automatically fixes the white balance based on current lighting. For best results, place a
white item (such as a piece of paper) in front of camera during adjustment.
MANUAL Manual mode lets you manually adjust the color temperature (KELVIN) or the red gain and blue
gain levels (R/B-GAIN) while monitoring the color of the image.
COLOR GAIN Set the color gain from 0 to 20.
To Next Page
Loading...
