20
Enabling Motion Detection
Set MOTION to ON or OFF. When MOTION is set to ON, an alarm notification is displayed
on the screen when movement is detected in the scene. You can adjust the sensitivity of the
motion detection by entering the DET SETTINGS submenu.
Use the options in the MOTION submenu to configure up to 4 motion detection zones.
WINDOW TONE Set the brightness level of the selected Zone.
WINDOW ZONE Select the motion detection Zone to adjust settings on (4 selectable zones).
WINDOW USE
Separately enable/disable each of the motion detection zones.
DET H-POS Moves the selected zone’s position right or left.
DET V-POS Moves the selected zone’s position up or down.
DET H-SIZE Adjusts the selected zone’s horizontal size.
DET V-SIZE Adjusts the selected zone’s vertical size.
To Next Page
Loading...
Need help?
General
