5
Introduction 1
This document provides instructions for configuring the 960H Ultra Wide Dynamic
HD3UH(X)/HD4UH(X) minidome camera settings. These instructions are intended for
system installers, administrators, and operators. For information about installing the
camera, refer to the appropriate Quick Installation Guide for your camera.
Use the following sections to configure and use your 960H Ultra Wide Dynamic Minidome
Camera:
• OSD Menu, page 6, for an overview of the OSD menus and settings.
• Programming the Camera, page 7, for information on navigating the OSD menus and
configuring the camera settings.
• Troubleshooting, page 27, for some camera troubleshooting tips.
• Specifications, page 28, for a list of HD3UH(X)/HD4UH(X) specifications.
To Next Page
Loading...
Need help?
General
