Honeywell IDENT KEY 3 User Manual

25
Operating Manual IK3 Operating Unit with Keypad
8.4 Access control functions
The type of AC functions is defined in the programming of the central control unit/EU. Optical and
acoustical acknowledgement is identical after an action has been performed.
Hold the IK data carrier in the reading range,
acknowledgement follows.
PIN, acknowledgement follows
Hold the IK data carrier in the reading range,
"Ready" flashes 1x
(if no authorization, negative acknowledgement)
Enter PIN, acknowledgement follows
Enter PIN, LED “Ready” flashes 1x
(if no authorization, negative acknowledgement)
Hold the IK data carrier in the reading range,
acknowledgement follows.
1. Only IK data carrier
2. Only PIN Enter
3. With IK data carrier and PIN
With PIN and IK data carrier
0....9
0....9
0....9
8.5 Info functions
The function "Info" indicates the current state of the zone
Call info. Activate the " " key
(armed / disarmed / alarm). Only if the data
carrier/PIN is authorized for arming/disarming, the LED "Alarm" will be activated.
For authorization with PIN and/or IK data carrier, see above.
i
i
Acknowledgement:
With authorization
Door lock release
Ready
(green)
Acoustical
(signal)
Positive acknowledg. Negative acknowledg.
Optical
Action
No door lock release
5 sec.
Indicator:
System is disarmed System is armed
Disarmed
(yellow)
Ready
(green)
Optical
5 sec. 5 sec.
5 sec.. Off
Alarm
(red)
Lights up in case
of alarm
Lights up in case
of alarm
IK-D
IK-D
IK-D
2 sec.
No authorization or
AC function not activated
or

Honeywell IDENT KEY 3 Specifications

General

Brand	Honeywell
Model	IDENT KEY 3
Category	Control Unit
Language	English