Honeywell Intermec PD43 User Manual

Appendix B — Default Settings
PD43 and PD43c Commercial Printer User Manual 155
Printhead
Lifted
Enable 1 Occurrences Error - Printhead lifted
Printhead Not
Detected
Disable 1 Occurrences Error - Printhead not
detected
Information Alert Default Settings
Information Alert Status
Delay
Repeat
Delay Unit Message
Print Job Complete Disable 1 Occurrences Print job complete
Started Disable 1 Occurrences Printer is started
Printer is rebooting Disable 1 Occurrences Printer is rebooting
Warning Alert Default Settings
Warning Alert Status
Delay
Repeat
Delay Unit Message
Ribbon
Installed
Disable 1 Occurrences Warning - Ribbon
installed
Upgrading
Firmware
Disable 1 Occurrences Warning - Upgrading
firmware
Odometer
(User
Resettable)
Disable 1 Occurrences Warning - Odometer (User
resettable) has reached a
preset value.
Odometer
(Printer)
Disable 1 Occurrences Warning - Odometer
(Printer) has reached a
preset value.
Replace
Printhead
Disable 1 Occurrences Warning - Replace
printhead
Clean
Printhead
Disable 1 Occurrences Warning - Clean printhead
Faulty Dot Disable 1 Occurrences Warning - Faulty dot is
detected
Error Alert Default Settings (Continued)
Error Alert Status
Delay
Repeat
Delay Unit Message

Honeywell Intermec PD43 Specifications

General

Brand	Honeywell
Model	Intermec PD43
Category	Printer
Language	English