Chapter 1 — About the Printers
26 PD43 and PD43c Commercial Printer User Manual
Cutter Provides automatic cutting as labels are
printed.
Cutter Tray Holds up to 20 labels as they are cut.
Installs on Cutter.
Boarding Pass Tray Holds airline boarding pass media.
Installs on Cutter.
Label Dispenser Removes paper backing and presents
labels one at a time for pickup. Includes
Label Taken Sensor.
Label Taken Sensor Detects when a label is printed and
pauses printing until the printed label is
removed.
Linerless Media Roller Non-stick platen roller dispenses printed
labels when you use linerless media stock.
Thick Media Springs Heavier-gauge springs increase printhead
pressure for best results when printing on
tag media.
Notchless Ribbon Core Adapter Enables use of ribbon with notchless core
of less than 2.5 mm (1 in) diameter or
10.16 cm (4 in) wide. For thermal transfer
printing.
USB-to-Serial Adapter USB to RS-232 adapter. Connects to
printer USB Host port and provides serial
connectivity to a PC.
USB-to-Parallel Adapter USB to IEEE 1284 adapter. Connects to
printer USB Host port and provides
DB25 connectivity to a PC or other
equipment.
Extension cables Cables provide access to the USB Host,
USB Device, and Ethernet ports without
the need to access the PD43 bottom
panel.
Flat top window Replaces the PD43 dome window for use
with 12.5 cm (5 in) media. For PD43 only.
External media holder Provides support for media up to 21.27
cm (8.375 in) for the PD43c.
PD43 Printer Options and Accessories (Continued)
Option or Accessory Description
To Next Page
Loading...
Need help?
General