Honeywell IQ8Control C

Fire Alarm Control Panel IQ8Control C/M
12 FB 798951.GB0 / 01.09
3.3 FACP IQ8Control M
The configuration of the FACP IQ8Control C includes:
 1 Basic module
 1 Power supply module
 1 Field device module or 1 Extension module 1
or
 max. 2 Extension modules - each with three micro
module slots
In this full configuration, a total number of slots for 7
(3 + 3 + 1) freely selectable micro module are available.
Slot 1
On the Basic module only the upper slot (slot 1) can be
used for a Field device or Extension module.
The Field device module must be installed in Slot 1 of
the Basic module.
Slot 2
The lower slot (slot 2) can be used for a Extension
module only.
A
Field device module Part No.772479
B
Field device module with one
additional micro module slots
Part No.772477
C
Extension module with one
additional micro module slots
Part No.772478
Connector 1Connector 2
A B C
1
2
D
D
D
Extension module with three
additional micro module slots
Part No.772476
Fig. 6: Configuration FACP IQ8Control M