Honeywell MeshGuard LEL IR - Default Chapter; Table of Contents

EchoView Host User’s Guide
3
Contents
1. Standard Contents ................................................................................................................................. 9
2. General Information ............................................................................................................................... 9
2.1. Key Features ............................................................................................................................... 10
3. Physical Description ............................................................................................................................ 11
3.1. LCD Display (Monitoring) ............................................................................................................ 12
4. Specifications ...................................................................................................................................... 13
5. Operation ............................................................................................................................................. 15
5.1. Turning The Instrument On ......................................................................................................... 15
5.2. Turning The Instrument Off ......................................................................................................... 16
5.3. Low Battery Indicator & Action .................................................................................................... 16
5.4. Over Range Alarm ....................................................................................................................... 16
5.5. Wireless Communication Indicator .............................................................................................. 17
5.6. Operation Modes ......................................................................................................................... 17
5.7. Detection Mode ........................................................................................................................... 18
5.8. Manually Sending Data ............................................................................................................... 20
5.9. Programming Mode ..................................................................................................................... 21
5.9.1. Entering Programming Mode ................................................................................................ 22
5.9.2. Exiting Programming Mode .................................................................................................. 23
5.9.3. Zero Calibration .................................................................................................................... 24
5.9.4. Span Calibration ................................................................................................................... 25
5.9.5. Change High Alarm............................................................................................................... 27
5.9.7. Change SPAN value ............................................................................................................. 29
5.9.8. Change Pan ID ..................................................................................................................... 30
5.9.9. Join Mesh Network ............................................................................................................... 30
5.9.10. Change Communication Interval .......................................................................................... 30
6. Diagnostic Mode .................................................................................................................................. 31
6.1. Entering Diagnostic Mode ........................................................................................................... 31
6.2. Exiting Diagnostic Mode .............................................................................................................. 31
6.3. Diagnostic Mode Readings ......................................................................................................... 32
6.3.1. Sensor Raw Count ................................................................................................................ 32
6.3.2. Battery Raw Count ................................................................................................................ 32
6.3.3. Temperature Raw Count ...................................................................................................... 32
6.3.4. Zero Raw Count .................................................................................................................... 32
6.3.5. Calibration Delta Counts ....................................................................................................... 32
6.3.6. Radio Type ............................................................................................................................ 33
6.3.7. Radio Module Firmware Version .......................................................................................... 33
6.4. Diagnostic Mode Programming ................................................................................................... 34
6.4.1. Radio Enable/Disable ........................................................................................................... 35
6.4.2. Enable STD or RTR .............................................................................................................. 35
6.4.3. Factory Setting ...................................................................................................................... 35
6.4.4. Audible & Visible Alarm Enable/Disable ............................................................................... 35
7. Internal Battery Replacement .............................................................................................................. 36
7.1. External Battery Usage ............................................................................................................... 38
7.2. Mounting The Plastic-Housing Instrument .................................................................................. 39
7.2.1. Replacing The Internal Battery ............................................................................................. 39