Honeywell MeshGuard LEL IR - Radio Type; Radio Module Firmware Version

MeshGuard LEL IR & CO2 IR User’s Guide
33
6.3.6. Radio Type
The radio module type is indicated by “rdt” followed by a number.
• Press [N/-] to advance to the next reading.
• Press [MODE] and [Y/+] together for three seconds to exit Diagnostic Mode and enter
Detection Mode.
6.3.7. Radio Module Firmware Version
Radio Module Firmware Version is indicated by “rdF” followed by a number (for example, “109”
stands for version 1.09).
• Press [N/-] to return to the first raw count.
• Press [MODE] and [Y/+] together for three seconds to exit Diagnostic Mode and enter
Detection Mode.