MeshGuard LEL IR & CO2 IR User’s Guide
54
Battery Replacement
RAE Systems offers two types of batteries: internal battery and external battery pack.
1. Use the 3-pin end of the tool to unscrew and open the battery cover by turning it
counterclockwise.
2. Remove the battery.
3. Insert the new battery with its positive (“+”) pole towards inside of the unit.
4. Replace the battery cover by turning it clockwise with the 3-pin end of the tool.
Note: Only change the battery in non-hazardous locations, and use the battery RAE Systems
provides, part number 500-0111-000 (EVE model ER34615 or XENO XL-205F). Only remove the
external battery adapter in non-hazardous locations.
cover
To Next Page
Loading...
