Honeywell MK7580-30A38-00-A - MS7580 Genesis - Wired Barcode Scanner - Pass-Through Settings (MS7580 Only)

5
Pass-Through Settings

* Enable
Pass-Through Scanning
In Presentation Mode

Disable
Pass-Through Settings
In Presentation Mode

³127015 ³127005
Enable 300 milliseconds
Pass-Through Timeout

³8439300
Enable 100 milliseconds
Pass-Through Timeout

³8439100
* Factory default configuration for the MS7580.
†
The term trigger and button are synonymous.

This feature is only supported in the MS7580 Genesis.

Contact a customer service representative for information on additional pass-through
timeout values.