3. Press the button one time to activate linear targeting.
4. Align the linear targeting line over the desired bar code.
Note: When scanning 1D bar codes, the bar code must be presented to
the imager in the correct orientation, see Figure 18. PDF and 2D
matrix codes may be presented in any orientation.
Figure 18. 1D Bar Code Orientation
5. Press button a second time to decode and send the data
6. The imager will return to the default presentation mode by either the
default time length or by double pressing the button.
Note: Decoding and functional capability of the imager is restricted through the
use of license numbers provided by Honeywell. Imagers will not support
key features such as, but not limited to, the ability to decode PDF, 2D or
OCR fonts without proper licenses. If you wish to purchase a limited
license for one or more of the key features not included in the standard
imager, please specify at the time of sale or otherwise contact a customer
service representative for more information. Standard models ship with
the ability to read all 1D, PDF, and 2D bar codes. OCR fonts are disabled
by default and must be specifically requested at an additional cost.
To Next Page
Loading...
