Honeywell MK7580-30B41-00 - Metrologic MS7580 Genesis User Manual (English)

Questions and Answers:

M
Mr. Paul MillerSep 6, 2025
Why Honeywell MK7580-30B41-00 - Metrologic MS7580 Genesis beeps at some bar codes and NOT for others of the same bar code symbology?
- C
  chapmannicoleSep 6, 2025
  If your Honeywell Barcode Reader beeps at some bar codes and not others of the same symbology, it could be due to several reasons: * The bar code may have been printed incorrectly; check for check digit/character/or border problems. * The imager may not be configured correctly for this type of bar code; check if check digits are set properly. * The minimum symbol length setting does not work with the bar code; check if the correct minimum symbol length is set.
A
Amber WellsSep 8, 2025
Why Honeywell MK7580-30B41-00 - Metrologic MS7580 Genesis Barcode Reader is transmitting each character twice?
- D
  Deanna RyanSep 8, 2025
  If your Honeywell Barcode Reader is transmitting each character twice, increase the interscan code delay setting. Also, adjust whether the F0 break is transmitted; it may be necessary to try this in both settings.
J
james00Sep 9, 2025
How to enable beep when bar code is scanned on Honeywell MK7580-30B41-00 - Metrologic MS7580 Genesis Barcode Reader?
- S
  Sherry HoganSep 9, 2025
  If your Honeywell Barcode Reader powers up, but does not beep when a bar code is scanned, enable the beeper and select a tone.
R
Robert WilliamsSep 12, 2025
Why are characters being dropped by Honeywell MK7580-30B41-00 - Metrologic MS7580 Genesis?
- R
  rhonda15Sep 12, 2025
  If characters are being dropped by your Honeywell Barcode Reader, add some inter-character delay to the transmitted output by using the Configuration Guides (PN 00-02544 and 00-05252).
J
jonesvictoriaSep 12, 2025
How to fix alpha characters showing as lower case on Honeywell MK7580-30B41-00 - Metrologic MS7580 Genesis Barcode Reader?
- K
  Kathryn HallSep 12, 2025
  If alpha characters show as lower case when using your Honeywell Barcode Reader, enable Caps Lock detect setting of the imager to detect if the PC is operating in Caps Lock.
J
jchavezSep 14, 2025
What to do if everything works except for a couple of characters on Honeywell Barcode Reader?
- N
  Natalie SchmittSep 14, 2025
  If everything works except for a couple of characters on your Honeywell Barcode Reader, try operating the imager in Alt mode, as these characters may not be supported by that country’s key look up table.

Honeywell MK7580-30B41-00 - Metrologic MS7580 Genesis Specifications

General

Brand	Honeywell
Model	MK7580-30B41-00 - Metrologic MS7580 Genesis
Category	Barcode Reader
Language	English

Summary

Introduction

Product Overview

High-performance presentation area-imaging bar code imager utilizing CMOS sensors.

Base Kit Components

Details of the standard components included in the MS7580 imager base kit.

Optional Accessories

Lists available optional accessories, such as AC to DC power transformers.

MS7580 Components

Labels

Maintenance

Cable Installation and Removal

Interface Installation

RS232

Instructions for connecting the imager using the RS232 interface.

Keyboard Wedge

Steps for installing the imager using the Keyboard Wedge interface.

RS485

Procedure for connecting the imager via the RS485 interface.

USB

Guide for connecting the imager using the USB interface.

Mounting the MS7580

Components of Adapter Kit 46-00911

Lists and illustrates components included in the MS7580 adapter kit.

Components of Wall Mount Kit 46-00913

Lists and illustrates components included in the MS7580 wall mount kit.

Installation of Adapter Kit 46-00911

Step-by-step guide for attaching the adapter plate and base plate to the imager.

Installation of Wall Mount Kit 46-00913

Steps for drilling pilot holes and securing the wall mount to the surface.

Operation

Modes of Operation

Explains the two main modes: Pass-through Scanning and Presentation Scanning.

Audible Indicators

Describes the different beeps and tones indicating imager status.

Visual Indicators

Explains the meaning of different LED states (colors, flashing, steady).

Failure Modes

Lists failure indicators like 'Long Razzberry Tone' and their causes.

Field of View

Illustrates and specifies the imager's field of view dimensions.

Depth of Field by Minimum Bar Code Element Width

Provides data on scan depth based on barcode element width for different symbologies.

IR Activation Range

Shows the area where the object detection sensor activates the imager.

Illumination Source

Details the imager's illumination source angles and dimensions.

IR Source

Shows the imager's IR source angles and dimensions.

Targeting Source

Illustrates the imager's targeting source angles and dimensions.

Troubleshooting Guide

Design Specifications

Operational

Lists operational specifications like light source, pulse duration, depth of scan field, field of view.

Mechanical

Details physical dimensions, weight, and termination type of the imager.

Electrical

Specifies input voltage, power consumption, and current ratings.

Environmental

Lists operating and storage temperature, humidity, light levels, and shock resistance.

Applications and Protocols

Keyboard Type

Lists selectable keyboard types (AT, IBM PS2) for PC keyboard wedge interface.

Keyboard Country Type

Lists supported keyboard country layouts for configuration.

Configuration and Upgrades

Configuration Modes

Describes three methods for configuring the imager: Bar Codes, MetroSet2, and Serial Programming.

Upgrading the Firmware

Details the process and requirements for updating the imager's firmware.

MS7580-124-EAS Model

Integrated RF EAS Antenna Connection

Instructions for connecting the RF EAS antenna cable to the imager.

EAS System Connection

Provides details for connecting the imager to Checkpoint EAS systems.

Configuration for EAS Applications

Steps to enable and configure EAS system support and signal modes.

EAS Tag Deactivation Range

Describes precautions and the expected range for deactivating EAS tags.

Imager and Cable Terminations

Standard Imager Pinouts

General pinout information for the MS7580 imager across different interfaces.

Standard Cable Pinouts (Host End)

Details pin configurations for RS232, RS485, and USB cables at the host end.

Keyboard Wedge VLink Cable

Pinout details for the Keyboard Wedge VLink cable and its adapter.

Limited Warranty

Regulatory Compliance

Safety

Covers safety information related to LED exposure and general precautions.

EMC

Details electromagnetic compatibility (EMC) standards for emissions and immunity.

Class A Devices

Specifies compliance for Class A devices when scanner cable is extended.

Class B Devices

Specifies compliance for Class B devices when scanner cable is shorter than 3 meters.

Customer Support

Product Service and Repair

Related product manuals

MK7580-30A38-00-A - MS7580 Genesis - Wired Barcode Scanner

48 pages

MK9535-79A540 - MS9535 VoyagerBT - Wireless Portable Barcode Scanner

Honeywell MS7120 Orbit

53 pages

Honeywell MS5145 – 00

24 pages

Honeywell Eclipse MS5145

40 pages

Honeywell Solaris MS7820

2 pages

Honeywell Voyager MS9520

3 pages

Honeywell MS9520 Voyager

2 pages

Honeywell VoyagerCG MS9540

2 pages

Honeywell MK7580-30B41-00 - Metrologic MS7580 Genesis User Manual

Table of Contents

Questions and Answers:

Honeywell MK7580-30B41-00 - Metrologic MS7580 Genesis Specifications

Summary

Introduction

Product Overview

Base Kit Components

Optional Accessories

MS7580 Components

Labels

Maintenance

Cable Installation and Removal

Interface Installation

RS232

Keyboard Wedge

RS485

USB

Mounting the MS7580

Components of Adapter Kit 46-00911

Components of Wall Mount Kit 46-00913

Installation of Adapter Kit 46-00911

Installation of Wall Mount Kit 46-00913

Operation

Modes of Operation

Audible Indicators

Visual Indicators

Failure Modes

Field of View

Depth of Field by Minimum Bar Code Element Width

IR Activation Range

Illumination Source

IR Source

Targeting Source

Troubleshooting Guide

Design Specifications

Operational

Mechanical

Electrical

Environmental

Applications and Protocols

Keyboard Type

Keyboard Country Type

Configuration and Upgrades

Configuration Modes

Upgrading the Firmware

MS7580-124-EAS Model

Integrated RF EAS Antenna Connection

EAS System Connection

Configuration for EAS Applications

EAS Tag Deactivation Range

Imager and Cable Terminations

Standard Imager Pinouts

Standard Cable Pinouts (Host End)

Keyboard Wedge VLink Cable

Limited Warranty

Regulatory Compliance

Safety

EMC

Class A Devices

Class B Devices

Customer Support

Product Service and Repair

Related product manuals