Honeywell Morley-IAS ZX2Se - Alphanumeric Display Indications; Normal Condition; Display Examples - Fire Alarms; Display Examples - Faults

MORLEY-IAS ZX Fire Alarm Control Panels
Page 8 Document No. 996-175-000-1, Revision 01 Commissioning Manual
3.3 Alphanumeric Display Indications
• The alphanumeric liquid crystal display gives 160 characters of information on a 4-line display. The
display is illuminated to assist viewing under dim ambient light conditions. NOTE: Should the AC Mains
fail; the back lighting on the liquid crystal display will be turned off to conserve battery power.
• When the numeric keypad is not in use, the display will revert to automatically scrolling through any
fire alarm or fault conditions present on the panel. If there are no alarm or fault conditions, the display
will show the date and time.
• Pressing the SHIFT key will show a list of optional functions or prompt for the level 2 password.
[Panel ACTIVE Control Keys INHIBITED] [1]
Do you want to enable the control keys?
3.3.1 Normal Condition
03-Mar-2007 11.38
All devices are inside working limits
3.3.2 Display Examples – Fire Alarms
1 of 1 FIRE
ALARM RAISED FROM CONTROL PANEL
[Active] 1)Commission 2)Test 3)Time [1]
4)Enable 5)Disable 6)Print 7)View
1 of 1 FIRE
2 of 2 FIRE MCP L2 A002 [1]
< - Zone Text - > < - Device Text - >
3.3.3 Display Examples – Faults
1 of 1 [1]
OPEN CIRCUIT ON SOUNDER B
For service phone (telephone no.)
2 of 8 No reply L2 A001 [1]
< - Zone Text - > < - Device Text - >
For service phone (telephone no.)