7. Login to SSDC. Enter a username and password (the default administrator username is
“administrator” and the password is “Default123”).
8. Click “LOGIN.”
9. Find the instrument on the list. Click on the instrument’s serial number to go to its
configuration.
10. Click “Settings.”
11. Scroll down to “Policy Settings.”
12. Deselect Policy Settings features you do not wish to use.
13.
Click
14. When the upload is done, exit SSDC.
15. Press [Y/+] on the MultiRAE to exit Communication Mode.
Honeywell MultiRAE Series™ 119 User Manual
To Next Page
Loading...
Need help?
General
