When a MultiRAE is connected to an AutoRAE 2, truck mount, or desktop cradle, the Man Down
alarm feature is disabled.
Man Down Messaging
In addition to the Man Down function in other MultiRAE monitors, they provide an option for
sending a message to Safety Suite Device Configurator (SSDC).
When the Man Down is triggered, this screen is shown:
If you do not need assistance, press [Y/+] before the countdown reaches 0 to stop the Man
Down alarm from being activated. Otherwise, press [N/+] to trigger the Man Down alarm
immediately, or do not press either key (the countdown will reach 0 and the alarm will start).
When the Man Down alarm occurs, this screen is displayed:
In addition, the instrument alarms (audible and visible) four times per second. The instrument
also sends an emergency message to Safety Suite Device Configurator (SSDC).
Press [Y/+] to clear the alarm. The alarm stops and the display returns to the main reading
screen.
Honeywell MultiRAE Series™ 89 User Manual
To Next Page
Loading...
