6
FCC STATEMENT
1.5 FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference. (2) This device must
accept any interference received, including, an interference that may cause undesired
operation.
FCC ID: PV3CGWMB
1.6 Warnings and Cautions
1.7 Disclaimer
Images in the document are for reference purpose only and are subject to change. All
trademarks, service marks, word marks, design marks, and logos are property of their
respective owners.
CAUTION:USERS MUST FOLLOW THE PROCESSES AND USAGES APPROVED AS PER
COMPLIANCE. A CHANGED OR MODIFIED USAGE NOT EXPRESSLY APPROVED BY
COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE GLSS
GATEWAY.
WARNING:
THESE INSTRUCTIONS CONTAIN PROCEDURES TO FOLLOW TO AVOID INJURY AND
DAMAGE TO EQUIPMENT. IT IS ASSUMED THAT THE USER OF THIS MANUAL HAS BEEN
SUITABLY TRAINED AND IS FAMILIAR WITH THE RELEVANT REGULATIONS.
ELECTRO-STATIC SENSITIVE DEVICES:
TAKE SUITABLE ESD PRECAUTIONS WHEN REMOVING OR INSTALLING PRINTED
CIRCUIT BOARDS.
THIS GATEWAY’S PANEL IS CE MARKED TO SHOW THAT IT CONFORMS TO THE
REQUIREMENTS OF THE FOLLOWING EUROPEAN COMMUNITY DIRECTIVES:
• EMC Directive 2014/30/EU
• Low Voltage Directive (LVD) 2014/35/EU
• Radio Equipment Directive 2014/53/EU
• RoHS Directive 2011/65/EU
• WEEE Directive 2012/19/EU
The gateway is designed to meet Additional National Requirements: EFSG [BRE,
AFNOR/CNPP, and VdS], Incert, SBSC, EMEA, and EAC
To Next Page
Loading...
Need help?
General