ID2000 Series Operating Manual
Appendix 1
A1 - 1 997-434-000-4, Issue 4
May 2010
Appendix 1
STATUS SUMMARY
1 Status Summary
There are nine possible status conditions of the panel.
This Appendix describes the system indications for each
status condition.
The default status is quiescent or NORMAL, which
indicates the absence of any other condition. The other
conditions are exceptions and more than one at a time
may be present. The following list is in order of the priority
of indications on the panel display:
a. EXTINGUISHANT RELEASE
b. FIRE
c. PRE-ALARM
d. FAULT
e. DEVICE(S) DISABLED
f. EVACUATE
g. TEST
h. ENGINEER
i. ENGINEER’S MUTE
j. NORMAL (quiescent)
To Next Page
Loading...
