6 RP2/RP4 User Guide
4. After the utility updates the connections, select the USB_Virtual_COM port
from the dropdown menu.
Note: Make sure this port is not in use by the printer driver when you add it to the host
system.
5. Select Tools - Query Printer Configuration (or press CTRL-q) to display the
printer’s configuration.
See Program the Interface beginning on page 15 for detailed information about
changing your printer’s settings.
Safety Precautions for Lithium Batteries
• Do not place batteries in fire or heat the batteries.
• Do not store batteries near fire or other high temperature locations.
• Do not store or carry batteries together with metal objects.
• Do not expose batteries to water or allow the batteries to get wet.
• Do not connect (short) the positive and negative terminals, of the batteries, to
each other with any metal object.
• Do not pierce, strike or step on batteries or subject batteries to strong impacts or
shocks.
• Do not disassemble or modify batteries.
Important Safety Instructions
This printer has been designed to provide many years of safe, reliable performance.
As with all types of electrical equipment, however, there are a few basic precautions
you should take to avoid hurting yourself or damaging the equipment:
• Read the installation and operating instructions.
• Read and follow all warning instruction labels on the printer.
• Make sure all openings on the printer remain unblocked. Never insert anything
into the openings or ventilation slots.
• Do not place the printer near a heat source.
• Do not use your printer near water or spill liquid into it.
Caution: There is a danger of explosion if the batteries are incorrectly
replaced. Replace the batteries with only the same or
equivalent type recommended by the manufacturer. Dispose of
used batteries according to the recycle program for batteries as
directed by the governing agency for the country where the
batteries are to be discarded.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
