Honeywell RP2 - WPA-PSK with TKIP

24 RP2/RP4 User Guide
6. After updating the new values, ensure that the Include column checkbox is
selected for the values, and click the Send button to send this change to the
printer.
7. Allow 30 seconds for the printer to reset.
WPA-PSK with TKIP
1. Open the NETira CT Printer Configuration Utility Tool and click on Tools -
Query Printer Configuration (or press CTRL-q) to query the printer.
2. Under Printer Information, click on WIFI.
3. Click on WPA/WPA2.
4. Change (or confirm) the following parameter settings:
• Group Cipher: TKIP
• Network Authentication Type: WPA-PSK_TKIP
5. In the WPA_PSK_TKIP/WPA2_PSK settings area, enter a new Pass Phrase.
6. After updating the new values, ensure that the Include column checkbox is
selected for the values, and click the Send button to send this change to the
printer.
7. Allow 30 seconds for the printer to reset.