Honeywell RP2 User Manual

26 RP2/RP4 User Guide
LED Display
If all the LEDs are red and blinking, it indicates it is too warm or cold for the printer
to print. See Product Specifications beginning on page 45 for more information.
Audible Indicators
Button Press Result
Short press Feeds label or paper length approximately 1 in. (2.54cm)
when configured for continuous media. Feeds media to
align with the next label when configured for gap or black
mark media.
Press and hold for 3 to 4 seconds
(when configured for continuous form
receipt paper)
Media feeds continuously to the maximum label length
Icon Indication
On/Off
Solid green = Printer is on
Short green flash = Printer is asleep
Blinking red = Charger input voltage is too low or too high
Battery charge level
When not charging:
Off = Battery is midway to fully charged
Solid orange = Battery charge is 10-30%
Blinking red = Battery charge is 10% or less
When charging:
Solid green = Battery charge is 90% or more
Solid red = Battery charge is less than 90%
Bluetooth indicator
Off = Bluetooth radio is off, disabled, not associated with a mobile
device, or printer is off
Blinking = Data transmission
Solid blue = Bluetooth is enabled and connected
WiFi signal
Off = WiFi radio is off, disabled, not associated with a mobile device or
network, or printer is off
White = WiFi is enabled and connected
Beeps Indication
1 long beep Power supply disconnected
2 short beeps every 5 seconds No media
2 long beeps Power supply connected
3 short beeps Battery charge is low
5 short beeps Printer door open

Honeywell RP2 Specifications

General

Type	Mobile printer
Print technology	Thermal
Product color	Black, Grey
Built-in display	No
Battery voltage	7.2 V
Battery capacity	2500 mAh
Power source type	Battery, DC
Battery recharge time	4 h
Storage temperature (T-T)	-30 - 65 °C
Operating temperature (T-T)	-20 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
USB port	Yes
Bluetooth version	4.0
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Security algorithms	64-bit WEP, 128-bit WEP, EAP-FAST, EAP-PEAP, EAP-TTLS, LEAP, WPA, WPA-TKIP, WPA2, WPA2-AES, WPA2-CCMP
Mobile operating systems supported	Android, iOS
Internal memory	- MB
Built-in barcodes	-
Page description languages	CPCL-native, DPL, IPL, XML, ZPL II
Media thickness	0.05 - 0.16 mm
Supported paper width	25, 57 mm
Maximum printing width	48 mm
International Protection (IP) code	IP54
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	77 mm
Width	116 mm
Height	160 mm
Weight	720 g