Honeywell RP2 User Manual

CHAPTER
7
RP2/RP4 User Guide 35
MAINTENANCE
Battery Charge Information
Once the battery is at a low charge level, the printer stops printing and queues
print jobs. The battery should be replaced at this time so the printer can print the
queued jobs. If the battery is not replaced before the supercap is drained, all
queued jobs will be lost.
The battery has a test button on it so you can determine how much charge is left.
Health Status
Press the test button once quickly. The Test indicator (circled in green) lights up to
show the health status of the battery.
TEST
LED Color Cycle Count
Green 1 - 400
Amber 400 - 500
Red 500 - 999

Honeywell RP2 Specifications

General

Type	Mobile printer
Print technology	Thermal
Product color	Black, Grey
Built-in display	No
Battery voltage	7.2 V
Battery capacity	2500 mAh
Power source type	Battery, DC
Battery recharge time	4 h
Storage temperature (T-T)	-30 - 65 °C
Operating temperature (T-T)	-20 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
USB port	Yes
Bluetooth version	4.0
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Security algorithms	64-bit WEP, 128-bit WEP, EAP-FAST, EAP-PEAP, EAP-TTLS, LEAP, WPA, WPA-TKIP, WPA2, WPA2-AES, WPA2-CCMP
Mobile operating systems supported	Android, iOS
Internal memory	- MB
Built-in barcodes	-
Page description languages	CPCL-native, DPL, IPL, XML, ZPL II
Media thickness	0.05 - 0.16 mm
Supported paper width	25, 57 mm
Maximum printing width	48 mm
International Protection (IP) code	IP54
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	77 mm
Width	116 mm
Height	160 mm
Weight	720 g