Revision 1 SLN 700 SmartLine NCR Level Transmitter User’s Manual Page 19
Programming menu description
The basic settings include the settings of main instrument parameters,
such as measuring range, material properties, etc. Press in the
running state to enter the programming state, and the LCD will display
the main menu.
Notes: The upper right number (not shown above) is the menu
number.
When the LCD menu number is 1, press key to enter the
medium programming. Display in LCD is as follows.
Medium menu is used to select liquid or solid to further determine
some other properties of the material that affect the measurement.
measurement
The measurement unit provides the user with the choice of measuring
in metric or imperial system. When displaying the medium (menu
number 1.1), press key to enter the unit of measurement setting
menu.
Display in LCD is as follows.
Press to enter the measurement unit selection menu, then select
the desired measuring unit.
To Next Page
Loading...
