Page 22 SLN 700 SmartLine NCR Level Transmitter User’s Manual Revision 1
This feature is used for display programming.
When displaying the main menu, press key to move the arrow
to the display item. Display in LCD is as follows.
Press to enter display mode programming.
Value
Enter display mode programming. Display in LCD is as follows.
It indicates that the parameter of the current display content is the
Distance, that is, the Distance value measured by the meter is
displayed. Press to enter the edit state. Display in LCD is as
follows.
Use key to move the arrow to the wanted parameter and press
to confirm. After editing, press to exit the display
programming and return to the upper menu.
Language options are current Chinese and English only.
When LCD displays unit of measurement (menu number 2.1),
press key to enter the language setting function. Display in
LCD is as follows.
To Next Page
Loading...
