Honeywell SMV800 - Figure 11: Jumper Location HART; Figure 12: Jumper Settings HART

SmartLine Multivariable Transmitter
18 Quick Start Installation Guide December 2015
Figure 11: Jumper Location HART
Jumper Settings
Description
Failsafe = UP (High)
Write Protect = OFF (Not Protected)
Failsafe = DOWN (Low)
Write Protect = OFF (Not Protected)
Failsafe = UP (High)
Write Protect = ON (Protected)
Failsafe = DOWN (Low)
Write Protect = ON (Protected)
Figure 12: Jumper Settings HART