Honeywell SMV800 - Bracket Mounting; Figure 3: Angle Mounting Bracket; Mounting Bracket

December 2015 Quick Start Installation Guide 5
Bracket Mounting
Mounting bracket, see Figure 3
Rotate the transmitter housing, see Figure 4
Level a transmitter with small absolute or differential pressure spans, see
Figure 5.
Mounting Bracket
Position bracket on 2-inch (50.8 mm) and install “U” bolt around pipe and
through holes in bracket. Secure with nuts and lock washers provided.
Figure 3 Example - Angle mounting bracket secured to horizontal or
vertical pipe.
Figure 3: Angle Mounting Bracket