Honeywell SMV800 - Table of Contents

SmartLine Multivariable Transmitter
2 Quick Start Installation Guide December 2015
Table of Contents
Installation ...................................................................................................3
Mounting the Transmitter ............................................................................4
Bracket Mounting ..................................................................................5
Mounting Bracket ..................................................................................5
Rotating Transmitter Housing ...............................................................6
Leveling Transmitters with Small Absolute or Differential Pressure
Spans ....................................................................................................7
Conduit Entry Connectors, Plugs and Adapters .........................................8
Wiring Connections and Power Up .......................................................... 10
Wiring Variations ................................................................................ 12
Input Sensor Wiring............................................................................ 13
Explosion-Proof Conduit Seal .................................................................. 15
Trim the Transmitter ................................................................................. 16
Procedure to Trim the Transmitter ..................................................... 16
Set the Jumpers For HART/DE ................................................................ 17
Setting Failsafe Direction and Write Protect Jumpers ....................... 17
Configuration Guide ................................................................................. 19
Tables
Table 1 - Conduit Entry Connectors and Plugs ..........................................8
Table 2 - Conduit Adapters .........................................................................9
Table 3 – Advanced Display Configuration .............................................. 19
Figures
Figure 1 – Electronic Housing Components ...............................................3
Figure 2: Mounting Brackets .......................................................................4
Figure 3: Angle Mounting Bracket ...............................................................5
Figure 4: Rotating Transmitter Housing ......................................................6
Figure 5: Using level to mount transmitter ..................................................7
Figure 6: Electronic Housing Conduit Entries .............................................9
Figure 7: HART/DE Transmitter Operating Ranges ................................ 10
Figure 8: Transmitter Terminal Board and Grounding Screw .................. 11
Figure 9: Thermocouple Connections ...................................................... 13
Figure 10: RTD Connections .................................................................... 14
Figure 11: Jumper Location HART .......................................................... 18
Figure 12: Jumper Settings HART ........................................................... 18