Installation Guide SMX-AUS
30 NS-MN-0030 / 11.2020
6.2 Fuse Maintenance
The fuse is contained in the MTB Live wire circuit.
1. Remove the input power before beginning the checks and replace operation.
2. Pull the fuse holder from the MTB.
3. Replace with the 250 V AC / 5 A fuse.
4. Push back the fuse holder into the MTB.
Fig. 14: Fuse Maintenance
REMOVE POWER BEFORE REPLACING THE FUSE.
Battery charging circuit fuse:
PTC RESET FUSE 30 V / 8 A RADIAL. This is a non-replaceable maintenance-free fuse.
6.3 Kit Assemblies
Part Number Description
315-651 Panel Chassis Kit-HON-AUS-2-Loop
315-650 Panel Chassis Kit-HON-AUS-1-Loop
315-652 SMX-AUS SMPS 1 & 2
315-501 Relay Card Kit
To Next Page
Loading...
