Installation Guide SMX-AUS
NS-MN-0030 / 11.2020 5
1 About This Guide
This guide is written with the understanding that the user has been trained in the proper operations and services for this product. The information provided in this
guide is intended to assist the user by describing the configurations and how they affect the operations.
1.1 Supplemental Documentation
The table below provides a list of documents for various users of SMX-AUS fire panels.
Document Name Document Number
SMX-AUS Programming Guide NS-MN-0031
SMX-AUS User’s Guide NS-MN-0032
SMX-AUS Installation Guide (This document) NS-MN-0030
SMX-AUS Operating Instructions CN-MN-0234
SMX-AUS Fire Alarm Control Panel (FACP) Quick Start Guide
A05-1062-000
1.2 Notice
The material and instructions covered in this guide have been carefully checked for accuracy and are presumed to be correct. The images in the document are for
reference purpose only and are subject to change. However, the manufacturer assumes no responsibility for inaccuracies and reserves the right to modify and revise
this document without notice.
These instructions cover the programming and commissioning of the SMX-AUS Fire Alarm Control Panels (FACP). For any technical assistance email at
HBTPacificFireSupport@Honeywell.com.
To Next Page
Loading...
